Splitboard set containing splitboard Furberg Freeride, bindings K2 Far Out M, pucks and skins G3 Universal.

The versatile Furberg Freeride Split features an adapted the sidecut radius to work better in all conditions; and is still long enough for high speed freeriding, but slightly shorter than previous years to make the board more reactive. Also, all rocker and reverse sidecut transitions have been tweaked lately for an even smoother ride.

High-speed stability in combination with manoeuvrable and catch-free properties has made the Freeride Splitbord one of the most talked-about splitboards of the last years. Its long sidecut radius makes the splitboard calm and forgiving, while rocker and reverse sidecut towards the tips make it float outstanding in powder and stay catch free in any situation. By incorporating a slight camber on the centre section, the stability, pop and responsiveness have increased considerably and also added grip and stability in skinning mode.

Floorboard technology is a tongue and groove on the freeride split and all Furberg splits is connecting the board halves and eliminating vertical play between them. The result is a responsive splitboard that rides more like a regular snowboard. We are convinced that the Freeride Split will be the most versatile and game-changing splitboard you’ve ever ridden!

Climbing skins G3 Splitboard Universal are included and cut to this splitboard's shape.

Radius: 12.2m (155cm), 12.8m (160cm), 13.4m (165cm), 14.0m (170cm)

Features:

• Low camber the best compromise between the flotation of full rocker, responsiveness, and grip of camber
• The turning radius slightly shorter than previous years to make our snowboards more responsive and playful on hardpack. But don’t worry, our boards still have approximately a 70 % longer turning radius than the average freeride board.  A longer turning radius generates better stability at higher speeds and, more importantly, gives the boards a calmer and more forgiving behavior by distributing the edge pressure over the entire contact length.
• Floorboard technology is a tongue and groove on the freeride split andall Furberg splits is connecting the board halves and eliminating vertical play between them. The result is a responsive splitboard that rides more like a regular snowboard.
• Longer Rocker and Reverse Sidecut radiuses - When a board is ridden flat on the snow, a long rocker transition will make the nose of the board impact irregularities with a low angle of incidence and slide over with little resistance.
• The sidewalls are made of UHMW PE, Ultra High Molecular Weight Polyethylene. These are highly resistant against abrasion and almost impossible to crack (in contrast to ABS sidewalls)
• The edges are considerably beefier than the industry standard, to be able to withstand harder impacts without cracking or deforming. The edges are fully wrapped around the board for maximum durability.
• We have been optimizing the core’s mix of Poplar and Paulownia over several years to find the perfect balance between weight, strength and ability to hold flex and shape over time.
• The base is 1.3 mm thick, which is thicker than industry standard. This means that you can hit rocks harder without getting core shots and you can stone grind the base more times. Isosport 7500 Sintered is one of the fastest bases available on the market. The thicker base does add a few grams on the weight, but more importantly it gives the board a much longer life.
• The Isosport Polyamide topsheet is one of the most durable topsheets on the market. The texture makes the topsheet very scratch resistant and less snow sticks to it. We also make all our topsheets in light colors to further avoid snow sticking to them. Dark colored topsheets get warmed up more by the sun and therefore more snow will freeze to them. This is a simple, yet effective way to save weight without compromising on durability and performance
• A custom ice scraper can be used to easily clean both board halves and bindings from snow and ice comes along with the splitboard. While not needed most of the time, this is a great tool to have for the conditions where snow tends to stick to the board.
• Triaxial fiberglass is used to get a good torsional stiffness of the splitboard
• Pucks included

Bindings: K2 Far Out S

Lift tickets and long lines? Who needs ‘em? The K2 Far Out Splitboard Binding specializes in chairlift liberation and crowd avoidance with built-in backcountry durability and all-day comfort in mind. The binding comes outfitted with the lightweight Aluminum Splitboard-Specific Chassis, a quick and easy Pinless Speed-Rail Mounting System, and Tool-less Forward Lean Adjustments with Touring Mode to ensure things are as effortless as possible when out past the gates. It uses the ergonomic Sender™ ankle strap and K2's Perfect Fit™ 2.0 toe strap to give you the perfect blend of luxury and efficiency, that will hold up for the long haul.

Features:

• Aluminum K2 Splitboard-Specific Chassis w/ Puck Mounting is strong and lightweight
• One-Tool Adjustment
• Pinless Speed-Rail Mounting System - upward facing, bombproof and easy to use
• Tool-Less Forward Lean Adj. with Touring Mode
• Lexan Polycarbonate Highback with forward lean adjustment - classic  styling with added rigity for  control and response
• Sender™ 3D Ankle Strap with Cam-Lock™ Centering - comfortable, low profile, padless and responsive
• Perfect Fit™ Toe Strap with Cam-Lock™ Centering 
• Aluminum Fixed-Pivot Ratchet with integrated EX Feed Housing
• Binding flex: 7/7
• Compatible with K2 Far Out Crampons
• Size: M (40.5 - 44)

Ocjene korisnika

* Sadržaj i mišljenja koje izražavaju korisnici odražavaju njihova osobna stajališta i ne predstavljaju stavove tvrtke PR, d.o.o. Tvrtka PR, d.o.o. ne preuzima odgovornost za točnost i vjerodostojnost izjava korisnika.

Napiši mišljenje