K2 Freeloader splitboard brings you a versatile, powerful setup for exploring your local backcountry. It is a perfectly tuned splitboard set consisting of splitboard, pre-cut skins, hardware and mounting pucks. WIDE option for people with bigger shoe size.

The K2 Freeloader was built to climb faster, descend sharper, and get you further into the backcountry. Countless hours on the skin track. A healthy number of summits and ridgelines, and more pow turns than we can count. It’s all lead to this. The K2 Freeloader Splitboard package is built on the same unisex outline as the Marauder Split. A bit of taper in the tail of the Freeloader helps it sink in the deep stuff, while the wider nose stays up well above the surface and blasts through choppy snow.

K2 engineers wanted to build a splitboard that was both lightweight and energetic, so they developed an all-new core for this one. The Paulownia TourLite core is ultra-lightweight and is wrapped in a triaxial braided fiberglass featuring our ICG™️ 20 technology. By integrating 20 tip-to-tail carbon fiber stringers into the fiberglass, they added pop to the board without unnecessary weight for edging and traversing on firm slopes and extra snappiness on the decent. Freeloader features a Snophobic™️ pemium top sheet technology that reduces snow build-up on the top of the board while climbing to keep you moving fast and light. Less weight equals longer tours and more laps. To round the package the hardest and fastest-gliding - Carbon Infused 5500 Sintered Base - is used. This material holds wax longer than a traditional sintered base, and a black base material along the running surface makes for seamless repairs.

The Karakoram Ultra Clips to the tip and tail to allow the split skis to be compressed tighter while at the same time reducing the opening and closing force from you. Once joined, the UltraClip™ fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. This makes your splitboard ride more like a solid snowboard than ever before.

This K2 Freeloader Package is equipped with Voile style binding mount pucks, mounting hardware, and pre-cut Pomoca 70/30 Mohair Blend skins.

Features:

• WIDE option for people with bigges shoe size
• Paulownia Tour Lite woodcore – Up to 500g lighter than an average core to reduce touring fatigue.
• Directional Camber Baseline™ - Camber mid-section with slight rocker tip/tail
• Combination Camber Baseline™ - The best of both worlds. By blending both traditional camber and rocker profiles, Combination Camber gives you all the benefits of both; the pop and precision of camber, and the float and predictability of rocker.
• Fiberglass: ICG 20 Triax Glass with Carbon - integrating Carbon Fiber stringers that run the length of the board into fiberglass ensures consistent power delivery in and out of turns while increasing the snowboard's pop, liveliness and durability without adding unnecessary rigidity.
• Snophobic™️premium top sheet technology - Hydrophobic, snow shedding top material that helps prevent snow from sticking to the tops of your skis.
• Tappered directional board is like a directional board but has a tail that is smaller in width than the nose.  Almost everything about the tip and tail is different.  The stance is usually set back, the nose is much bigger than the tail and it is usually more of a surf style one direction only kind of ride.
• Base Material: Carbon Infused 5500 Sintered Base -  the hardest and fastest-gliding base in K2's collection. This material holds wax longer than a traditional sintered base, and a black base material along the running surface makes for seamless repairs.
• Karakoram Ultra Clips to the tip and tail to allow the split skis to be compressed tighter while at the same time reducing the opening and closing force from you
• The UltraClip™ fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. This makes your splitboard ride more like a solid snowboard than ever before.
• Splitrack™ inserts - K2's Split Track mounting system opens up a whole new dimension for avid split boarders. No longer are stance's limited by stiff pucks, K2's opened it up to allow any desired stance on earth. Freedom to roam.
• Z-Clip™ skin attachment system
• Pre-cut Pomoca 70/30 Mohair Blend skins (with Z-Clip attachments, tail clasps, and tip hooks), mounting pucks and hardware included
• Flex: 7

Recenzii

* Conținutul și opiniile exprimate de utilizatori reflectă punctul lor de vedere personal și nu reprezintă pozițiile companiei PR, d.o.o. PR, d.o.o. nu își asumă responsabilitatea pentru acuratețea și credibilitatea declarațiilor utilizatorilor.

Scrie o recenzie