The Dynafit ST Rotation 10 ski touring binding is the evolution of the Radical ST 2.0 Binding. It offers the largest possible entry comfort with its new, integrated centering system. The pivoting toe piece avoids unintended releases, guaranteeing you TÜV-certified safety. This pin binding offers 22.5mm of flex in the length adjustment in both directions and can be set for a release value ranging from 4-10. A forward pressure of 10mm ensures that the release value remains constant even upon deflection of the skis.

A more elegant binding for a more civilized age. The ST Rotation is the new DIN certification-ready kid on the block, and it’s now the best choice for backcountry skiers who want to optimize for knee-protection. It’s a full-featured binding with brakes, multiple risers, and generous adjustability. Dynafit’s latest and greatest also has refinements for smooth operation and easier servicing.

The toe piece sits on a rotation plate introduced with the ST 2.0, which means a consistent heel-release irrespective of the make of your boots or condition of your toe-fittings. However, the Rotation 10 adds a notched centering device which makes stepping into the toe much, much easier. No longer do you need to lock the toe or look down at your heel to check alignment. A quick flip of the beefy toe lever will switch between uphill and downhill modes.

The heel unit is built around Dynafit’s new Bayonet Lock, which intelligently connects the baseplate and heel housing of the binding into one robust unit. This results in a stiffer and more secure binding platform, while also improving serviceability. The unit features whopping 10mm of longitudinal elasticity which will soak up bumpy terrain and big landings without hesitation. It also makes the release more consistent throughout the flex of the ski. Paired with the rotating toe piece, this creates a tech binding capable of achieving certification at a low-ish weight. Perfect for the skier who enjoys ripping side-country laps and center-punching remote bowls.

Features:

• Brake width: 105 mm
• Suitable for max. ski width (under ski boot) from 70 - 85mm
• Release capacity: 4 – 10 DIN
• Rotation toe piece - Pivoting toe piece for optimum combating of pre-release, following sudden impacts
• Step In Side Towers, which aid step-in entry and reduce chances of pre-release from lateral shock
• HUB Centering device in the toe makes for much easier step-in versus the ST/FT 2.0 series
• Bayonet Lock creates a secure binding platform that is easily disassembled if needed
• 10 mm forward pressure in order to accomodate ski flex
• 22,5 mm +/- length adjustment
• Easy lock brake system - Super positive brake actuation, built-in AFD, and new anti-rotation tab
• 2 climbing levels with flat mode; easily changed with a ski pole while skinning
• Crampon Slots – Reinforced crampon slots in baseplate for ski crampons
• Compatible with the Dynafit Crampons for icy ascents (sold separately): 80mm, 90mm, 100mm, 110mm, 120mm, 130mm
• Extra-wide binding surface area via new, wider binding rail / baseplate for optimum power transfer
• Tech Soles Only – Boots with tech fittings in the toe and heel are required for use with this binding
• TÜV certified
• Materials: Forged aluminum, stainless steel, chromoly steel, high tech synthetic
• Weight: 599g (1/2 pair)

VÉLEMÉNYEK

* A felhasználók által kifejezett tartalmak és vélemények tükrözik személyes nézeteiket, és nem képviselik a PR, d.o.o. álláspontját. A PR, d.o.o. nem vállal felelősséget a felhasználók állításainak pontosságáért és hitelességéért.

Vélemény írása